S.No | Code | Abbreviation |
---|---|---|
1 | AC | Alternative Current |
2 | ACDRV | Adapter current drive |
3 | ACGOOD | Valid adapter active -low detect logic open drain output |
4 | ACIN | Adapter current input |
5 | ACN | Adapter current negative ( taken from current sensing resistor ) |
6 | ACP | Adapter current positive ( taken from current sensing resistor ) |
7 | ACOP | Adapter current over current protection |
8 | ACOV | Adapter current over voltage protection |
9 | ADP+ | Adapter positive supply |
10 | ADP_ID | Adapter Identity |
11 | AGND | Analog Ground |
12 | ALWP | Always on Power |
13 | B+ | Adapter or Battery power rail to power the circuit ( this is the point motherboard takes power to all the other areas of the motherboards power requirement) |
14 | BATT | Battery |
15 | BAT+ | Battery power rail to power circuit |
16 | BAT_DRV | Battery MOSFET's gate driver |
17 | BAT_V | Battery voltage |
18 | BOM | Bill of material management |
19 | BT | Button |
20 | BT_EN | Bloototh Enable |
21 | BUZER | It means connected |
22 | BYP | Bypass |
23 | CHGEN | Charge enable active-low logic input |
24 | CIN | Input Capacitor |
25 | CLK_EN | Clock Enable |
26 | CN | Connector |
27 | CRT | Cathode Ray Tube |
28 | CSIN | Current Sensor Input Negative |
29 | CSIP | Current sensor input positive |
30 | DC | Direct Current |
31 | DM | DIM Socket / Socket Memory / DDR Socket |
32 | DOCK | Docking Socket |
33 | EC | Embedded Controller |
34 | EC_ON | Embedded Controller Enable / IO Enable / SIO enable |
35 | EMI | Electromagnetic Interference |
36 | EN | Enable |
37 | ENTRIP | Enable Terminal |
38 | F | Fuse |
39 | FSEL | Frequency Select input |
40 | GATE | Trigger Mosfet Gate |
41 | GND | Ground |
42 | GP | Ground Pin |
43 | GPI | General Power Input |
44 | GPIO | General power input and output |
45 | HDMI | High definition multimedia interface |
46 | ID | Continuous Drain Current |
47 | IDM | Pulsed Drain Current |
48 | IIN | Operating supply current |
49 | IIN (SHDN) | Shutdown supply current |
50 | IIN (STBY) | Standby Supply Current |
51 | IS | Continuous source current |
52 | IVIN | Battery Supply Current at VIN pin |
53 | JP | Jumper Point ( there are few jumper points will be there on the motherboard for troubleshooting and separating circuits, this jumper point help us to troubleshoot easily ) |
54 | KBC | Keyboard Controller / IO / SIO / EC - all are same |